What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 19.06.2025 00:01
In schematic diagrams this is the symbol for a fuse:
It also is a device that limits the change in current flow.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
[old diagram got deleted by accident]
What is your review of X-Men '97 season 1?
[image of Common-mode choke]
but this device (an Inductor) … impedes the rapid changes in the current.
He then describes Rainy Season and Lightning.
Is it just me, or do we all hate Sasuke from Naruto?
This one hit behind the barn.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–14 [Omar Gharbi Omar Gharbi ]
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
nine
Because the load is inductive, the current lags the voltage.(by a bit).
Why do Argentinians use "vos" instead of "tú" in informal speech?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Why has no country adopted the SA80/L85 rifle?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
One
but I think this circuit , shows a few more pieces.
What is something you have to share?
Barnstars:
He then describes the function of a fuse.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
How do flat earthers explain the Earth being stationary? Is this concept considered impossible?
The third is lightning and “how it gets conducted into a home.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
The other is “what does a “fuse” do?”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
First Sentence:
At one ohm, the resistor has a maximum of 1 watt power.
What were some things that the ancient Greeks excelled at compared to the Romans?
eight
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
A fuse is a non-resetable over current circuit protector.
(Dc diagram shown, AC is similar).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
so, what happens?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What does a fuse do?
So, the voltage could go up to 500 volts, and the fuse will not open up.
A circuit breaker is similar, but is resettable.
what exactly is a ‘surge’ protector?
Edit 2024–10.
An AC voltage/ current source, and an ac inductive load.
These are simplified answers to the original question, and does not change anything I wrote above.
Now when you have a certain ac resistance, then a current flows in a loop.
the problem then depends on "how fast does the fuse operate?".
2024–10–10[John johnson John Johnson ]
This is 'the assistant's answer'
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
One is “what exactly is in a ‘surge protector’ ? ”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Here is a simplified AC power diagram.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–16 [ OO OLAOYE OYEBODE ]
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
The bolt then partially travels down the line to your home.
What is lightning?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
For this case there are devices called Metal oxide varistors (MOV).
But it can get overloaded, and no longer works.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is where the MOV conducts again, and dissipated the energy.
There are two important concepts here.
I post the exact comment here.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
But… the neutral is now “floating” because of the 1 ohm resistance.
This device then solves the entire problem.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
It seems Mohan does not understand the difference between a comment and an Answer.
a photo is worth a thousand words.
There are three different concepts here that are getting confused.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Upvotes:
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
These devices are installed between the “hot” and “neutral” and protective ground.
He then asserts :
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
At least they know the answer if they wanted it.